FREE NEXT DAY DELIVERY over £30

ORDER BY 3PM For Next Day Delivery

CALL 016044 633445 to speak to us.

£4.90

This is the hardest of all 'one pack' varnishes. An ultra hard, high quality coating with a satin or dead flat finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish to be obtained. 

FREE SHIPPING On All Orders Over £30

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £30

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 20 In Stock
Sku: A0007254

This is the hardest of all 'one pack' varnishes.


An ultra hard, high quality coating with a satin or dead flat finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish to be obtained.


Formulatated for floors and areas of high wear.


When using dead flat finish, if a very high level of durability and stain resistance is required, apply one or two coats of Floor Varnish Satin Finish followed by one or two coats of Floor Varnish Dead Flat Finish.

This is the hardest of all 'one pack' varnishes.


An ultra hard, high quality coating with a satin or dead flat finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish to be obtained.


Formulatated for floors and areas of high wear.


When using dead flat finish, if a very high level of durability and stain resistance is required, apply one or two coats of Floor Varnish Satin Finish followed by one or two coats of Floor Varnish Dead Flat Finish.

ideal for
• wooden floors • cork tiles • stone • slate • brick • quarry tiles • wooden worktops

 

unique qualities
• dries fast cures fast   highly heat and water resistant • ultra hard • clear as glass • good resistance to alcohol, stains and chemicals • resistant to heel marks • sands to a high-grade finish • easy to apply 
• wash brushes in water


BrandPolyvine
Pack Sizes1lt, 2lt, 4lt
CoverageApprox. 10-20 sq. m per litre.
Drying TimesApprox. 30 minutes @ 20degrees C / 70degrees F
RecoatableApprox. 16 hours @ 20degrees C / 70degrees F,     Full Cure after 16 hours
MPNVIHDWC4, VIHDWC5, VIHDWC7, VLS500, VLS1000, VLS4000
GTIN729870010260, 729870010277, 729870010284, 5030777000922, 5030777000939, 5030777000946

How To Apply Polyvine Heavy Duty Floor Varnish

 

Polyvine H/D Floor Varnish can be applied by brush, spray or roller.

 

Porous surfaces should be primed with H/D Floor Varnish diluted 10% with water, prior to applying a further 2 or 3coats.

 

On wooden floors, light sanding in between coats may be necessary, if there is any raising off the grain.

 

Allow 2 hours in between coats and 16 hours after final coat before full use.

 

Do not use in temperatures below 5 °C / 40° F or in very high humidity.

 

Lower temperatures will slow the final cure time.

Any equipment used can be cleaned using soap and water before the clear coat dries. Wipe any excess off surfaces with a damp cloth. Any dried deposits will need a paint stripper to remove them.

This is the hardest of all 'one pack' varnishes. An ultra hard, high quality coating with a satin or dead flat finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish to be obtained. 

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page