OVER £50 Free Next Working Day

ORDER BY 3PM For Next Working Day

CALL 01604 633445 Sales & Technical

£98.10
£68.67
inc VAT
inc VAT

Dacrylate finishing coat for vehicles, plant and machinery. 

Availability: 199 In Stock
Sku: DACVM0101
Dacrylate 5lt Vehicle & Machinery Enamel Gloss
Dacrylate 5lt Vehicle & Machinery Enamel Gloss Change Colour
×

ALL AVAILABLE COLOURS

Close
  • Dacrylate finishing coat for vehicles, plant and machinery.
  • This product is ideal for industrial and agricultural equipment.
  • The product has good resistance to oils & grease and dries to a hard finish

•  Excellent exterior durability
•  Good resistance to oils, grease and chemicals
•  Non-yellowing
•  Dries to hard film
•  Rapid drying
•  Mild solvents

BrandDacrylate
Pack Size5ltr
ApplicationSpray or Brush
Coverage10.7m2 per litre approx.
Drying Time1 Hour
Thinners BrushingDacrylate R1 Thinners
Thinners SprayingDacrylate R70 Thinners
Line No97 - Line

how to apply dacrylate vehicle & machinery enamel

 

This material should preferably be applied at temperatures in excess of 10°C. Relative humidity should not exceed 90% and in these conditions good ventilation is essential. Substrate temperature should be at least 3°C above the dew point and always above 0°C. At application temperatures below 10°C spraying characteristics may be impaired.

 

Airless spray: Tip size: 9-11thou (0.23-0.28mm) Tip pressure: 2000psi (137bar)

 

Conventional spray: Tip size: 55 thou (1.4mm) Tip pressure: 40-60 psi (2.7-4.1bar)

 

Brush application: No thinning required ready to use.

 

Roller application: No-thinning required ready to use.

 

Thinning: 15% of Dacrylate Thinner R70 may be required when spraying the product to achieve optimum spray characteristics.

 

If the product needs to be thinned for brushing/rolling application then Dacrylate Thinner R1 is required.

 

Clean-up:

 

Clean all equipment after use with Dacrylate Thinner R1 or R70.

 

Do not allow product to remain in hoses, guns or spray equipment.

 

All surplus product should be disposed of in accordance with appropriate regional regulations/legislation.

Dacrylate finishing coat for vehicles, plant and machinery. 

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page