OVER £50 Free Next Working Day

ORDER BY 3PM For Next Working Day

CALL 01604 633445 Sales & Technical

inc VAT
inc VAT

Bona Traffic HD Anti Slip is an ideal choice for stairs, nurseries, kitchens and similar locations.

Availability: 999 In Stock
Sku: D0000956

A lacquer with all the features of Bona Traffic HD but formulated to meet the highest standards for slip resistance in workplaces and other situations where an increased risk of spills exists.

Bona Traffic HD Anti Slip is an ideal choice for stairs, nurseries, kitchens and similar locations.

Can be used to protect untreated wood as well as prefinished floors.

• Increases protection from accidental slips

• Ultimate speed and durability

• Allows full traffic after 12 hours  Easy and safe to apply

• Very low odour

• GreenGuard Gold certified for very low indoor emissions.

• Recommended for schools and nurseries.

• EC1RPlus classified for very low emissions (the industry’s most stringent standard on indoor emissions).

• Very low solvent content (VOC), <5%.

No of coats2-3
CoverageUp to 8 per litre
Drying Times2h 30m

How To Apply Bona Traffic HD Anti Slip


Shake the Traffic HD can and add one bottle of Traffic HD Hardener.

Immediately shake the mixture thoroughly for 1 minute and then insert the enclosed filter.

If mixing smaller quantities of lacquer then pour the required amount of lacquer into a separate can. 1 litre of lacquer corresponds to one part of hardener. 2 litres to two parts a.s.o.

The mixture of lacquer/hardener should be used directly or at least within 4 hours.

2. Apply the lacquer using a Bona Roller.

Roll with a smooth, flowing motion alternately across and with the grain of the wood avoiding accumulations of product.

Always maintain a “wet edge” to avoid overlaps.

Allow to dry properly before applying further layers.

Anticipate slightly longer drying time for each layer that is applied.


If necessary make an intermediate sanding using a screen or the Bona Scrad System grit P150 (or finer) and remove dust before applying a final layer of lacquer.

Note: If the previous layer of lacquer has been allowed more than 24 hours drying time then an intermediate sanding is always required.

Floor will take light foot traffic approximately 8 hours after the final application and may be put into full use after 12 hours.

Allow the surface to dry for at least 3 days before covering with carpets or other floor coverings.

Also avoid placing heavy objects and avoid damp mopping the floor during this time.

Note: If Traffic HD Anti-slip has been combined with Bona Prime Deep and Bona Create then the surface must be allowed to cure for 1 week before covering the surface

Maintenance & Cleaning

Clean the floor with Bona Cleaner or Bona Wood Floor Cleaner and a microfibre pad.

For public areas it may be necessary to introduce a machine based cleaning programme.

Worn surfaces can be renewed by applying a new coat of Bona Traffic HD Anti-slip. Note: Bona Freshen Up and Wood Floor Refresher cannot be used with Bona Traffic HD Anti-slip as the slip resistance qualities will be affected.

Similarly the floor should not be maintained with a polish or other floor maintenance products.

Bona Traffic HD Anti Slip is an ideal choice for stairs, nurseries, kitchens and similar locations.

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page