OVER £50 Free Next Working Day

ORDER BY 3PM For Next Working Day

CALL 01604 633445 Sales & Technical

£17.93

 Simply strip by rinsing with water

 Does not dry, long working time - up to 24 hours

 Removes up to 8 coats in one application for paint, varnish, stains & anti fouling

 Easy to use gel consistency which will not run, ideal for vertical surfaces

 Safe to sue on all surfaces including G.R.P but not aluminium

Availability: 200 In Stock
Sku: A0007151

MARINE STRIP is a powerful, water washable solvent free paint stripper that will remove oil and alkyd based paint, varnish, woodstain and anti-fouling. Requiring no supervision or immediate removal of the softened coating,

MARINE STRIP strips up to 8 coats of finish in one application. Suitable for virtually any surface including wood, metal, plastic and GRP, MARINE STRIP’s gel consistency means it will not run, making it ideal for vertical surfaces. Easy to apply,

MARINE STRIP dissolves paint in the smallest recess, softening all accumulated layers for simple, clean removal. VOC free and non flammable,

MARINE STRIP is safe to use in poorly ventilated or confined areas


 


 

• For exterior use only. • Removes varnishes, stains, paints, anti-foulings... • Works on metal**, wood**, plastic, gelcoat... • Horizontal or Vertical surfaces.

Biodegradability: Easily Biodegradable. Certificate Number: OECD 301 F. Viscosity: Gel. Gravity at 20°C (68°F): 1.10 ± 0.05. Physical State: Viscous liquid. Flammability: Not classed as flammable. Shelf Life: 18 months in original unopened packaging.

Container Size: 1L, 2.5L, 10L.

Appearance & Odour: Creamy, caustic soda smell.

Average working times:  1 coat 2 coats 3 coats Alkyd/Oil paint, stains and varnishes 5-15 min 10-30 min 15-45 min Acrylic paint, stains and varnishes Test on small area to determine working time Anti-foulings Allow to work a minimum of 12 hours

 Note:  The above are average working times only. A test should be carried out to determine the actual contact time required to remove the requisite number of coats. VOC: N/A.

Apply a thick coat of MARINE STRIP over the whole surface to be stripped. For woods rich in tannins, work large areas in zones to avoid excessive darkening of the wood. Allow product to work. Remove MARINE STRIP and dissolved paint with fresh water and a stiff scrubbing brush or paint scraper, alternatively use a pressure washer (max. 60 bars / 870 psi).

NB: The use of hot water makes the job easier. Thoroughly rinse the surface with fresh clean water After stripping and rinsing. All porous (Wood, Stone, Brick....) surfaces must immediately be treated with DECK CLEANER* while still wet to neutralise the surface and restores the woods colour.

NB: Consult us for additional information and advice prior to using MARINE STRIP on Oak and Chestnut.

 Simply strip by rinsing with water

 Does not dry, long working time - up to 24 hours

 Removes up to 8 coats in one application for paint, varnish, stains & anti fouling

 Easy to use gel consistency which will not run, ideal for vertical surfaces

 Safe to sue on all surfaces including G.R.P but not aluminium

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page