OVER £50 Free Next Working Day

ORDER BY 3PM For Next Working Day

CALL 01604 633445 Sales & Technical

£99.95

 Ideal for difficult conditions such as marine environments

 Accepts all paint types - Polyurethane, Epoxy, Chlorinated rubber, Car paints etc

 Stabilises the surface whilst penetrating the substrate, driving out excess moisture and air

 Provides a stable solid layer that other paints can firmly adhere to

 Minimal preparation required - Eliminates the need for sandblasting

Availability: 200 In Stock
Sku: A0007159

OWATROL® C.I.P. (Corrosive Inhibiting Primer) is an anti-corrosive primer that possesses the penetrating properties of OWATROL® OIL with the added benefi t that it may be overcoated with any coating without the risk of it dissolving.

OWATROL® C.I.P. stabilises the surface penetrating deep into the substrate, driving out excess moisture and air to form a solid stable layer.

With OWATROL® C.I.P.  sand or shot-blasted surfaces do not require immediate priming; a light rust coating will not affect its performance or the final result.


 


 

• Interior and exterior use.
• Horizontal and vertical surfaces.
• New and rusted surfaces - Ferrous and non-ferrous metals.
• Steel superstructures, motor vehicles...
• Civil engineering and marine equipment.
• Railings, gates...
• Nautical ballast tanks.

Finish: Satin.
Vehicle Type: Alkyd Resins.
Solvent Type: Solvent.
Viscosity: Thick liquid.
Specifi c Gravity (at 20°C): 0,971 ± 0,05.
Physical State: Liquid.
Solid Content: 50,6 ± 3.
Flammability: Not classifi ed as fl ammable.
Flash point: > 60°C.
Temperature Resistance (Fully Cured Dry Film): + 175˚C.
Shelf life: 2 years minimum in original unopened packaging.
Container size: 0.5L, 2.5L, 20L.
Colour: Brick Red.
Touch Dry: 6 hours.
Dry Time: 24 hours, depending on temperature and humidity.
Re-coating Time: 24-72 hours depending on fi nish: C.I.P. 24 hours; Oil/Alkyd paints 24-48 hours;
High Solvent paints i.e. 2 pack, urethane etc 48-72 hours.
VOC: EU limit value for this product (cat. A/i): 500 g/l. (2010). This product contains max 480 g/l.
VOC.

Stir well before and during use.
Do not thin.
New surfaces
:
Prime with 1 coat of OWATROL® C.I.P. and allow to dry.
For surfaces subject to aggressive climatic conditions apply 2 priming coats.
Clean, lightly rusted or new unpainted rusty steel
:
Apply 2 coats of OWATROL® C.I.P. allowing drying time between coats.
Old severely rusted surfaces
:
Apply 3 coats of OWATROL® C.I.P. allowing drying time between coats.
OR
Apply wet on wet applications of OWATROL® OIL* until rust is fully saturated and allow to dry
24 hours.
Apply 2 coats of OWATROL® C.I.P. allowing drying time between coats.
Previously coated surfaces
:
Spot prime all exposed metal with 2 coats of OWATROL® C.I.P. allowing drying time between coats
Apply 3rd coat over entire area and allow to dry

View FileOwatrol CIP Product Sheet Size: (1.53 MB)

 Ideal for difficult conditions such as marine environments

 Accepts all paint types - Polyurethane, Epoxy, Chlorinated rubber, Car paints etc

 Stabilises the surface whilst penetrating the substrate, driving out excess moisture and air

 Provides a stable solid layer that other paints can firmly adhere to

 Minimal preparation required - Eliminates the need for sandblasting

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page