FREE NEXT DAY DELIVERY over £50

ORDER BY 3PM For Next Day Delivery

CALL 016044 633445 to speak to us.

£35.00

The preferred finish of one of our senior chemists, this exterior eggshell, opaque wood finish has excellent flow, giving a beautiful low sheen on woodwork and metalwork.

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 500 In Stock
Sku: LGTE01872
Little Greene Tom's Exterior Oil Eggshell
Little Greene Tom's Exterior Oil Eggshell Change Colour
×

ALL AVAILABLE COLOURS

Close

The preferred finish of one of our senior chemists, this exterior eggshell, opaque wood finish has excellent flow, giving a beautiful low sheen on woodwork and metalwork.

The preferred finish of one of our senior chemists, this exterior eggshell, opaque wood finish has excellent flow, giving a beautiful low sheen on woodwork and metalwork.

 

    • Available in all colours

 

    • Extremely durable, flexible finish

 

    • Weather resistant and completely washable

 

    • Suitable for exterior woodwork and metalwork

 

    • surface dry in 4 hours, recoat in 16 hours

 

    • Fully washable

 

    • Available in 2.5 & 1 Litre

 

    • Low sheen (15%)

 

BrandLittle Greene
Pack Sizes1lt, 2.5lt
Theoretical Coverage14-16 square meters per litre (varies with surface porosity & texture)
Recommended number of coats2
Surface Dry2-3 Hours
Time to recoat16 Hours minimum
Colour AvailibilityAll Little Greene colour ranges

Thinning should only take place after the material has been thoroughly mixed.

 

Application and use should always conform with the codes of practice described in BS 6150 and BS 5493.

 

Stir well before use.

 

Thin with 0–5% white spirit as required. Lightly rubbing down between coats will remove any dust motes and other surface contamination, producing a near professional finish

 

Conventional Thin with up to: 40% (v/v) water. Tip size: 1.60 to 2.00 mm (62 to 78 thou) Air pressure: 0.28 to 0.41 MPa (40 to 60 psi) Airless Thin with up to: 20%(v/v) water Tip size: 0.28 to 0.54 mm (11 to 21 thou) Pressure at tip: 12.6 to 19.6 MPa (1800 to 2800 psi)

 

Brushing:

 

Use a high quality natural bristle brush, suitably sized for the project at hand. New brushes should be conditioned by washing in clean water and thoroughly drying with a clean, lint free, cloth. Avoid immersing brush too far into the paint to prevent paint from entering the ferrule. Avoid drips and splashes by not overloading the brush. Apply paint in even strokes and only extend painting area such that a wet edge can be easily maintained. For the highest quality appearance, keep final brush strokes all in the same direction and never go over paint that has already begun to dry.

 

Roller:

 

Use a short nap mohair roller type sleeve for best appearance on smooth surfaces. Keep final strokes all in the same direction, maintaining a wet edge throughout. Never be tempted to go over already drying paint as this will lead to lap marking and flashing.

 

Spray Finishing:

 

CLEANING THINNER Equipment should be cleaned immediately after use with white spirit. Conventional Thin with up to: 25%(v/v) white spirit Tip size: 1.60 to 2.00 mm (62 to 78 thou) Air pressure: 0.28 to 0.41 MPa (40 to 60 psi) Airless Thin with up to: 10%(v/v) white spirit Tip size: 0.28 to 0.54 mm (11 to 21 thou) Pressure at tip: 12.6 to 19.6 MPa (1800 to 2800 psi)

The preferred finish of one of our senior chemists, this exterior eggshell, opaque wood finish has excellent flow, giving a beautiful low sheen on woodwork and metalwork.

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page