FREE NEXT DAY DELIVERY over £50

ORDER BY 3PM For Next Day Delivery

CALL 016044 633445 to speak to us.

£61.99

A high quality resin water-based paint for exterior masonry surfaces. Dries to a water vapour permeable film with excellent adhesion to prepared surfaces.

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 500 In Stock
Sku: LGMP0743
Little Greene 5ltr Masonry Paint
Little Greene 5ltr Masonry Paint Change Colour
×

ALL AVAILABLE COLOURS

Close

A high quality resin water-based paint for exterior masonry surfaces. Dries to a water vapour permeable film with excellent adhesion to prepared surfaces.


Formulated to withstand normal building movement and resistant to the effects of sunlight and moisture.

A high quality resin water-based paint for exterior masonry surfaces. Dries to a water vapour permeable film with excellent adhesion to prepared surfaces.


Formulated to withstand normal building movement and resistant to the effects of sunlight and moisture.

BrandLittle Greene
Pack Sizes5ltrs 
Theoretical Coverage13 square metres per litre (varies with surface porosity & texture
Recommended number of coats
Surface Dry2 Hours
Time to recoat4 Hours minimum
Colour AvailibilityAssorted colours from the Little Greene Range

Stir thoroughly before use.

 

Do not apply to surfaces when the ambient temperature is below 5o C or if there is a risk of rain during application or drying. Avoid painting in full sun or on warm surfaces. For best results, always attempt to time the painting of a given elevation prior to exposure to direct sunlight.

 

Brushing: Use a high quality synthetic bristle brush that is suitably sized for the project at hand. New brushes should be conditioned by washing in clean water and thoroughly drying with a clean, lint free, cloth. Avoid immersing brush too far into the paint to prevent paint from entering the ferrule. Avoid drips and splashes by not overloading the brush. Apply paint in even strokes and only extend painting area such that a wet edge can be easily maintained. For the highest quality appearance, keep final brush strokes all in the same direction and never go over paint that has already begun to dry.

 

Roller: Use a short nap wool blend type sleeve for best appearance on smooth surfaces. Increase nap length for textured surfaces, as appropriate, to ensure even and thorough coverage. Keep final strokes all in the same direction, maintaining a wet edge throughout. Never be tempted to go over already drying paint as this will lead to lap marking and flashing. 

 

Spray Finishing:

 

Conventional Thin with up to: 40% (v/v) water Tip size: 1.60 to 2.00 mm (62 to 78 thou) Air pressure: 0.28 to 0.41 MPa (40 to 60 psi)

 

Airless Thin with up to: 20% (v/v) water Tip size: 0.28 to 0.54 mm (11 to 21 thou) Pressure at tip: 12.6 to 19.6 MPa (1800 to 2800 psi)

A high quality resin water-based paint for exterior masonry surfaces. Dries to a water vapour permeable film with excellent adhesion to prepared surfaces.

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page