FREE NEXT DAY DELIVERY over £50

ORDER BY 3PM For Next Day Delivery

CALL 016044 633445 to speak to us.

£21.00

A water-based primer undercoat suitable for painting on all interior and exterior surfaces.

 

 

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

FREE SHIPPING On All Orders Over £50

QUICK & EASY
PAYMENTS

ONLINE
EXPERT SUPPORT

Availability: 500 In Stock
Sku: LGIP2957
Little Greene Intelligent ASP - All Surface Primer
Little Greene Intelligent ASP - All Surface Primer Change Colour
×

ALL AVAILABLE COLOURS

Close

A water-based primer undercoat suitable for painting on all interior and exterior surfaces.

Ease of application on a diverse range of different surfaces and materials, combined with a speedy two-hour drying time, make this robust primer the go-to preparation for projects that need to be completed quickly.

With a low sheen of 5-8%, it is available in a wide range of colours.

Suitable for use under all Little Greene trim products

A water-based primer undercoat suitable for painting on all interior and exterior surfaces.

Ease of application on a diverse range of different surfaces and materials, combined with a speedy two-hour drying time, make this robust primer the go-to preparation for projects that need to be completed quickly.

With a low sheen of 5-8%, it is available in a wide range of colours.

Suitable for use under all Little Greene trim products

BrandLittle Greene
Pack Sizes1lt, 2.5lt
Theoretical Coverage14 square metres per litre at 30 microns DFT (dry film thickness) (loss factors will apply in practice)
Recommended number of coats1 or 2 as required
Touch Dry1 - 2 Hours
Time to recoat2 - 3  Hours minimum
Colour AvailibilityAll Little Greene colour card colours

 

 

Stir thoroughly before use.

Do not apply to surfaces when the ambient temperature is below 8oC or if there is a risk of rain during application or drying.

To obtain good flow, apply generously but avoiding runs and sags.

Brushing: Use a high-quality synthetic bristle brush that is suitably sized for the project at hand. New brushes should be conditioned by washing in clean water and thoroughly drying with a clean, lint free, cloth.

Avoid immersing brush too far into the paint to prevent paint from entering the ferrule.

Avoid drips and splashes by not overloading the brush. apply paint in even strokes and only extend painting area such that a wet edge can be easily maintained.

For the highest quality appearance, keep final brush strokes all in the same direction and never go over paint that has already begun to dry.

Roller: Use a short nap wool blend type sleeve for best appearance on smooth surfaces.

Increase nap length for textured surfaces, as appropriate, to ensure even and thorough coverage. Keep final strokes all in the same direction, maintaining a wet edge throughout.

Never be tempted to go over already drying paint as this will lead to lap marking and flashing. 

Spray Finishing:
Thin with up to:  40%(v/v) water Tip size:  1.60 to 2.00 mm  (62 to 78 thou) Air pressure:  0.28 to 0.41 MPa (40 to 60 psi)
Airless  Thin with up to: 20%(v/v) water Tip size:  0.28 to 0.54 mm (11 to 21 thou) Pressure at tip: 12.6 to 19.6 MPa (1800 to 2800 psi)

View FileLittle Greene ASP Data Sheet Size: (49.8 KB)

A water-based primer undercoat suitable for painting on all interior and exterior surfaces.

 

 

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page