OVER £50 Free Next Working Day

ORDER BY 3PM For Next Working Day

CALL 01604 633445 Sales & Technical

£67.69
inc VAT
inc VAT

Treatex Hardwax Oil Natural is a tough professional finish for floor boards and other interior wood.   This oil system dries very quickly, two coats can be applied within 8 hours.

Availability: 195 In Stock
Sku: A0004117

Treatex Hardwax Oil Natural is a tough professional finish for floor boards and other interior wood.   


This oil system dries very quickly, two coats can be applied within 8 hours.


Natural Hardwax Oil contains a small amount of white pigment which allows it to be used in two different ways:


1. Base coat


If you prefer to protect light timbers whilst changing the unfinished colour as little as possible then Treatex Natural Hardwax Oil can be applied as a base coat underneath two coats of Treatex Clear Hardwax Oil to neutralise the warming effect. 


2. Top coat:


For a purer white, seal Spruce Colour Tone with two coats of Natural Hardwax Oil. When Treatex Clear Hardwax Oil is applied on top of our Spruce Colour Tone it can have a slight yellowing effect on the colour.


 

 

    • • Easy to apply 

 

    • • Quick drying

 

    • • Low odour

 

    • • Should not be used on darker timbers

 

    • • Meets with VOC emissions regulations

 

    •  •Tinted with natural pigments

 

    •  • Keeps lighter timbers from warming when Hardwax Oil is applied

 

BrandTreatex
Pack Sizes1lt, 2.5lt
Coverage1L will cover approximately 20m² in one coat depending on the timber and method of application.
2.5L will cover approximately 50m² in one coat depending on the timber and method of application.
MPN

1105E, 1105H


 

GTIN

5060310660108, 5060310660115

Method 1 – as a base coat.

 

Natural Hardwax Oil should not be used as a base coat on darker coloured timbers. To change the appearance of light coloured timbers as little as possible, brush (not roller) on a thin coat of Natural Hardwax Oil. To avoid a patchy finish it is important that the Natural base coat is applied evenly.

 

To avoid overlap marks wipe the wet surface lightly with a lint free cloth to distribute the colour evenly. Allow to dry.

 

Once dry, seal with two coats of Treatex Clear Hardwax Oil 

 

Method 2 – as a top coat.

 

For a brighter white seal our Spruce Colour Tone by using a brush or roller to evenly apply Natural Hardwax Oil allowing roughly 50ml per m².

 

Allow to dry then apply with a brush or roller a second coat of Natural Hardwax Oil, again allowing roughly 50ml per m². Allow to dry thoroughly overnight before the surface is lightly used. 

Treatex Hardwax Oil Natural is a tough professional finish for floor boards and other interior wood.   This oil system dries very quickly, two coats can be applied within 8 hours.

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page