OVER £50 Free Next Working Day

ORDER BY 3PM For Next Working Day

CALL 01604 633445 Sales & Technical

£104.80

Finish with an extremely fast hardness development accepting full traffic already after 12 hours.

Availability: 994 In Stock
Sku: D0000952

• An ideal choice for shops and public locations where minimal downtime is important


• For use when the highest possible durability is required.


• Its low emissions and low odour make it possible to use without vacating the adjacent areas


• It also ensures there is no lingering smell.


• Recommended for overcoating prefinished parquet.

• Allows full traffic after 12 hours, extremely rapid hardness development
• Ultimate durability
• EC1RPLUS approved. The industry's best possible assurance against indoor air pollution for a high level of health protection 
• Suitable for recoating already finished surfaces*
• Very low odour
• Non-yellowing
• Friction approved to both EN 14904:2006 and DIN 18032:2
































BrandBona
No of coats2
CoverageUp to 10 per litre
Drying Times8 hours
Size5lt
MPN7312799215538
GTINWT155346001


How To Apply Bona HD Traffic


1.


Shake the Traffic HD can and add one bottle of Traffic HD Hardener. Immediately shake the mixture thoroughly for 1 minute and then insert the enclosed filter. If mixing smaller quantities of lacquer then pour the required amount of lacquer into a separate can. 1 litre of lacquer corresponds to one part of hardener. 2 litres to two parts a.s.o. The mixture of lacquer/hardener should be used directly or at least within 4 hours.


2.


Apply the lacquer using a Bona Roller. Roll with a smooth, flowing motion alternately across and with the grain of the wood avoiding accumulations of product. Always maintain a “wet edge” to avoid overlaps. Allow to dry properly before applying further layers. Anticipate slightly longer drying time for each layer that is applied.


3.


If necessary make an intermediate sanding using a screen or the Bona Scrad System grit P150 (or finer) and remove dust before applying a final layer of lacquer. Note: If the previous layer of lacquer has been allowed more than 24 hours drying time then an intermediate sanding is always required.


Floor will take light foot traffic approximately 8 hours after the final application and may be put into full use after 12 hours. Allow the surface to dry for at least 3 days before covering with carpets or other floor coverings. Also avoid placing heavy objects and avoid damp mopping the floor during this time.


Note: If Traffic HD has been combined with Bona Prime Deep and Bona Create then the surface must be allowed to cure for 1 week before covering the surface

View FileBona Traffic HD Data Sheet Size: (162.06 KB)


View FileBona Traffic HD H&S Sheet Size: (130.44 KB)



View FileBona Traffic Overcoating Instructions Size: (303.56 KB)



Finish with an extremely fast hardness development accepting full traffic already after 12 hours.

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page